KJams Tremolo

The KJams Tremolo features output level control, true bypass, built-in tap switch, external tap switch input, external expression pedal input, and three program control pots. The pedal is based on the Spin FV-1 DSP chip. It is designed and assembled in Holland, Michigan, USA. The Tremolo pedal has two programs, selectable by the toggle switch: -Norm (down) – Tremolo with Speed, Depth, and Wave shape controls. -Harm (up) – Harmonic Tremolo with Speed, Depth, and Wave shape controls. There is a crossover at 800 Hz; the high and low frequencies are alternated to create a vibrato-like modulation similar to early 60s Fender brown face amps. Footswitches -Bypass is a standard bypass/enable latching switch. -Tap sets the speed of the Tremolo. Two taps set the speed. Tap just once and the speed will be set to the lowest. Pots -Speed sets the speed of the Tremolo. -Depth set the depth of the Tremolo. -Wave selects between four wave shapes: square, triangle, sawtooth up, and sawtooth down. -Volume controls output level. Jacks -In and Out jacks are standard mono, right to left. -Tap acts exactly as the built-in tap. Use a standard normally open switch. -Expression replaces the middle/lower control, Speed.